Pro Line by Bonded
Call: 1 877 726 6333
Call: 1 877 726 6333
Tile and Stone Setting Mortars
Liquid Mortar and Grout Additives
Aqua Seal is a premium, ready to use anti-fracture and waterproofing membrane. Use for a variety of residential and commercial applications both interior and exterior. Aqua Seal can be used in showers (steam), shower pans, tub surrounds, pools, fountains, kitchens, countertops, and more. Floors exposed to heavy water usage, structures designed to hold water permanently and all floor penetrations where water leakage is a concern. Can also be used as a slab-on-grade moisture barrier under resilient flooring, for instructions for use as a slab-on-grade moisture barrier for resilient flooring installations refer to TB #102 Aqua Seal as Moisture Barrier. As an anti-fracture material, Aqua Seal can effectively reduce crack transmission in ceramic and stone flooring. ANSI A118.10, A118.12
Deck Mud is designed for both interior and exterior use for direct bond to concrete slabs; or to be used with cleavage or waterproof membranes and reinforced with coated wire mesh or galvanized, treated metal lath. DECK MUD is not affected by prolonged contact with water. Use in areas with depressed slabs or use to plumb and square surfaces installed by other trades. Deck Mud used in conjunction with a membrane can eliminate the damaging effects of hydrostatic pressure for on grade slabs. Creates a dense substrate on which to apply ceramic tile or stone. ANSI A108.1A
LevelBond® is a premium self-leveling underlayment composed of Portland cement and unique chemical additions that when mixed with water creates a free-flowing mortar. LevelBond® will find its own level when poured and is designed to create a smooth, level surface for placement of floor coverings. LevelBond® is for interior use over concrete, exterior grade plywood (EGP), marble, terrazzo and ceramic tile as long as they have first been primed with LevelBond® PRIMER.
LevelBond® PRIMER is a high quality bonding agent for self-leveling underlayments. LevelBond® PRIMER reduces water absorption, provides increased adhesion to old concrete and other substrates. Use as a substrate primer on approved interior installations prior to the application of LevelBond® Self Leveling Underlayment.
Universall Patch is designed to patch uneven or rough surfaces. Additional uses as a skim coat, leveler, rapid patch, underlayment, deep patch, and thin patch. After Universall Patch has been allowed to cure completely, surface may be exposed to constant water.
Wall Float is designed for both interior and exterior use and can be applied over the following items with or without the use of metal lath: Portland cement, plaster, haydite block, hollow clay tile, brick, and gypsum board. WALL FLOAT is not affected by prolonged contact with water. Use interior or exterior, walls or ceilings, superb workability over wood or metal studs. All ingredients are pre-measured, no waste. Convenient for small or large jobs, creates a dense substrate on which to apply ceramic tile or stone. ANSI A108.1A
AllFlex is a highly flexible, latex-Portland cement mortar uniquely designed with a blend of dry polymers, Portland cement, plasticizers, and sand. This single-component mortar cures to provide a high flexural strength. AllFlex will reduce tile cracking when used on appropriate substrates that are subjected to limited deflection and vibration. AllFlex may be applied directly over, in plane minor shrinkage cracks up to 1/16" in width with no additional crack-isolation membrane application. AllFlex is designed to bond all types of ceramic and natural stone tile over a variety of substrates. ANSI A118.1, A118.4, A118.11, A108.5
AllFlex Lite is a highly flexible, latex-Portland cement mortar uniquely designed with a blend of dry polymers, Portland cement, plasticizers, and sand. This single-component mortar cures to provide a high flexural strength. AllFlex Lite will reduce tile cracking when used on appropriate substrates that are subjected to limited deflection and vibration. AllFlex Lite may be applied directly over in plane, minor shrinkage cracks up to 1/8" in width with no additional crack-isolation membrane application. AllFlex Lite is designed to bond all types of ceramic and natural stone tile over a variety of substrates. ANSI A118.1, A118.4, A118.11, A108.5
AllSet is used as a bond coat for setting high lug, absorptive, semi-vitreous and vitreous, brick, cement, ceramic, mosaic, natural stone, porcelain, precast terrazzo, and quarry tiles for service in residential and commercial use. It is used in a mortar bed from 3/32" to 3/16" after the tiles have been properly embedded. AllSet has excellent water and impact resistance, is water cleanable, non-flammable, and good for exterior work, and requires no soaking of tiles. AllSet provides a permanent installation with higher bond strength and lower material and labor costs then conventional Portland cement mortar beds. ANSI A118.1, A118.4, A118.11, A108.5
AllSet RS allows you to set tile and grout in 2-3 hours and then open to light foot traffic within the same day. AllSet RS is used as a rapid setting bond coat for setting high lug, absorptive, semi-vitreous and vitreous, brick, cement, ceramic, mosaic, natural stone, porcelain, precast terrazzo, and quarry tiles for service in residential and commercial use. It is used in a mortar bed from 3/32" to 3/16" after the tiles have been properly embedded. AllSet RS has excellent water and impact resistance, is water cleanable, non-flammable, and good for exterior work. ANSI A118.1, A118.4, A118.11, A108.5
FloorSet is a dry-set mortar with good bonding ability for basic tile setting jobs. FloorSet is designed for both interior and exterior use. Approved for walls, floors, and countertops. FloorSet can be used to set absorptive, semi-vitreous ceramic and Saltillo clay tiles. Meets ANSI A118.1, A108.5, with the addition of Pro-Line ProLatex liquid additive FloorSet meets ANSI A118.4, ANSI A118.11
FloorSet Modified is an economical polymer modified dry-set mortar designed for the bonding of all types of tiles. It may be used for either walls or floors and is perfect for both interior and exterior applications. FloorSet Modified is a blend of Portland cement, sand and special dry latex additives that significantly improve bond strength and freeze-thaw stability performance characteristics. ANSI A118.1, A118.4, A108.5
FloorSet RS allows you to set tile and grout in 2-3 hours and then open to light foot traffic within the same day. FloorSet RS is a rapid setting mortar with good bonding ability for basic tile setting jobs. FloorSet RS is designed for both interior and exterior use. Approved for walls, floors, and countertops. FloorSet RS can be used to set absorptive, semi-vitreous ceramic and Saltillo clay tiles. ANSI A118.1, A108.5. With the addition of Pro-Line ProLatex liquid additive FloorSet RS meets ANSI A118.4
Glass Bond L is a unique latex additive that is specially designed for use with Pro-Line Brilliance colored sanded grout. When Glass Bond L and Pro-Line Brilliance colored sanded grout are combined, they create a custom colored setting material designed specifically for glass tile installation. Designed for both interior and exterior applications, Glass Bond L provides a superior bond and is ideal for use in demanding conditions. ANSI A108.5, A118.1, A118.4 *Note: There are no uniform standards for glass tile application, please follow tile manufacturers directions when choosing the proper setting material and any possible limitations.
Glass Bond P is a unique, latex-Portland cement mortar specifically designed for use with glass tiles. This optically bright white formula will add a distinguished look to any glass tile installation. Glass Bond P may also be used to install ceramic, porcelain, and stone tiles. Designed for both interior and exterior applications, Glass Bond P provides a superior bond and is ideal for use in demanding conditions. ANSI A108.5, A118.1, A118.4, A118.11. *Note: There are no uniform standards for glass tile application, please follow tile manufacturers directions when choosing the proper setting material and any possible limitations.
Medium Bed Modified fully supports heavy tiles and stone, reducing lippage problems and the need for leveling or pre-floating rough surfaces. Medium Bed Modified can be built up to 3/4" (19mm) without shrinkage or extended set times. It may be used for either walls or floors and is perfect for both interior and exterior applications. Medium Bed Modified is a blend of Portland cement, sand and special dry latex additives that significantly improve bond strength and freeze-thaw stability performance characteristics. ANSI A118.1, A118.4, A108.5
Medium Bed NM can be used over uncoupling membranes that require a Non-Modified setting mortar. Medium Bed NM fully supports heavy tiles and stone, reducing lippage problems and the need for leveling or pre-floating rough surfaces. Medium Bed NM can be built up to 3/4" (19mm) without shrinkage or extended set times. It may be used for either walls or floors. Medium Bed NM when mixed with ProCrylic or ProLatex additives in place of water meets or exceeds ANSI A118.4 requirements. ANSI A118.1, A108.5
Medium Bed Premium fully supports heavy tiles and stone, reducing lippage problems and the need for leveling or pre-floating rough surfaces. Medium Bed Premium can be built up to 3/4" (19mm) without shrinkage or extended set times. With significant non-sag properties and unparalleled impact resistance, both floor and wall installations can be completed with just one application. It may be used for either walls or floors and is perfect for both interior and exterior applications. Medium Bed Premium is a blend of Portland cement, sand and special dry latex additives that significantly improve bond strength and freeze-thaw stability performancecharacteristics. ANSI A118.4, ANSI A118.11, A108.5
MultiTile Standard is an economical polymer-modified dryset mortar designed for the bonding of all types of tiles for low traffic or light duty areas. MultiTile Pro is a special blend of polymers designed to increase adhesion and bond strength. Both may be used for either walls or floors and can be used for interior and exterior applications. ANSI A118.1, A118.4, A108.5
ProSet is a high strength economical bond coat for setting high lug, absorptive, semi-vitreous and vitreous, brick, cement, ceramic, mosaic, natural stone, porcelain, precast terrazzo, and quarry tiles for service in residential and commercial use. It is used in a mortar bed from 3/32" to 3/16" after the tiles have been properly embedded. ANSI A118.1, A118.4, A118.11, A108.5
Stone Veneer Set is used as a mortar bond coat for setting precast, natural stones such as marble, granite and slate, cultured stone and lightweight masonry veneer units for service in residential and commercial use. Stone Veneer Set has excellent water and impact resistance, is water cleanable, non-flammable and ideal for both interior and exterior work. Stone Veneer Set provides a permanent installation with higher bond strength and lower material and labor costs. Use Stone Veneer Set for placing stone veneer on fireplaces, landscapes, walls, entryways, chimneys and custom accents. Suitable substrates can be either horizontal or vertical and include concrete, masonry, stud walls, galvanized metal lath, exterior grade plywood, and backerboards. Exceeds ASTM C270 bond strength requirements. Stone Veneer Set conforms as it pertains to setting of ceramic, stone, or marble tiles. ANSI A118.1, A118.4, A118.11, A108.5
Brilliance Sanded Grout is a premium one-part, polymer modified Portland cement grout that delivers unmatched performance. No additives are required, just mix with water. Brilliance Sanded Grout offers colorfast pigments blended with high quality latex modifiers, antimicrobial additives, and efflorescence reducers. Brilliance sanded grout provides superior flexural and bond strength, high compressive strength, excellent color control with minimal efflorescence. Acceptable for joints 1/8" up to 1/2", Ideal for both residential and commercial applications and designed to withstand the most demanding installations. ANSI A108.1, A108.4, A108.5, A108.7, A108.10, A118.6, and A118.7
Brilliance Non-Sanded Grout is a premium one-part,polymer modified Portland cement grout that delivers unmatched performance. No additives are required, just mix with water. Brilliance Non-Sanded Grout offers colorfast pigments blended with high quality latex modifiers, antimicrobial additives, and efflorescence reducers. Brilliance Non-Sanded grout provides superior flexural and bond strength, high compressive strength, excellent color control with minimal efflorescence. Acceptable for joints up to 1/8" in width. Ideal for both residential and commercial applications and designed to withstand the most demanding installations. ANSI A108.1, A108.4, A108.5, A108.7, A108.10, A118.6, and A118.7
Brilliance Paver Grout is a premium one-part, Portland cement grout that delivers unmatched performance. Brilliance Paver Grout is a specially designed,high performance colored grout to be used with quarry, slate, pavers, brick, and cement tiles for both interior and exterior use. Only the addition of water is required to produce a dense smooth grout. Pro-Line ProCrylic can be used in place of water to intensify its bond and flexural strength for installations subjected to thermal shock and when grouting tiles for exterior installations. Acceptable for joints up to 1", ideal for both residential and commercial applications and is designed to withstand the most demanding installations. ANSI A108.1, A108.4, A108.5, A108.7, A108.10, A118.6. *Available in 30 colors.
Pool Grout is a Portland cement based grout specifically designed to minimize the discoloring effects caused by chemicals used in pool maintenance. The non-shrinking, non-toxic formula is bacteria resistant and provides excellent durability and bond strength. The premium sanded consistency is ideal for joints from 1/16" up to 1/2". The fine texture allows for a smooth, dense joint. This product meets or exceeds ANSI A118.6.*Available in White only.
Pro-Line Poxy is a 100% solids blend of epoxies and special colored silica fillers and offers high performance, color uniformity, durability, and stain resistance with extraordinary ease of use. Pro-Line Poxy. used in place of traditional cement grout, is applied using a standard hard rubber float. Pro-Line Poxy. can be used to fill joints from 1/16" to 1/2". Do not exceed 3/16" on vertical applications. In addition it can also be used to produce an impermeable, high strength mortar, and is highly resistant to chemicals. Use it for interior floor and wall applications and for exterior applications where the surface temperature is 50-100 F (10-38 C). It may be used for both floor and wall installations. Pro-Line Poxy is water cleanable before curing and easy to work. ANSI A108.4, A108.6, A118.3
Pro-Line ProBond can be used as a bonding adhesive as well as an admixture to improve adhesive qualities, moisture retention, flexibility, toughness and chemical resistance. When used as a bonding adhesive, Pro-Line ProBond will bond new mortar, plaster and concrete to existing concrete, block, tile, brick, marble, stone, wallboard, metal, glass and most painted surfaces. As an admixture, Pro-Line ProBond may be substituted for a portion of the water content in mortar, plaster or concrete to improve most all the physical properties of these Portland cement mixes. Modified mixes will also resist cracking and chemical degradation due to chloride exposure.
Pro-Line ProCrylic is a liquid polymer additive designed to be used in place of water to increase performance and bond strength of setting mortars, grouts, and Portland cement mortar mixes. It adds water resistance and improves shock absorption. Substantially increases performance of thin-set mortars for setting all types of tile, stone and setting over hard to bond to surfaces. Meets ANSI A118.4 and A118.11.
Pro-Line ProLatex is a liquid polymer additive designed to be used in place of water to increase performance and bond strength of dry-set mortars such as Pro-Line FloorSet or Portland cement mortar mixes. It adds water resistance and improves shock absorption. Increases performance of non-polymer modified thin-set mortars for setting all types of tile, stone and setting over hard to bond to surfaces. Meets ANSI A118.4 and A118.11.
AllClean is a sulfamic acid crystal that when mixed with water is used for cleaning tile, grout, and masonry surfaces. Suitable surfaces include Acid-Resistant Glazed Tile, Quarry Tile, Unglazed Ceramic Tile, Porcelain Tile, Cement Grout & Masonry Mortar
Brilliance Siliconized Acrylic Sealant is an exceptional; one part siliconized acrylic latex caulk designed for the professional and homeowner alike. This easy to use product forms a long lasting, flexible, water tight seal that will resist mold, mildew and cracking on most building materials. True to its name, Brilliance Siliconized Acrylic Sealant is available in a myriad of colors to match every major grout manufacturers color available on the market today and in the future. With two textures sanded and smooth Brilliance Siliconized Acrylic Sealant blends in uncommonly well with any application.
Brilliance Grout Stain is a user friendly, low cost way to give tiles a new look without replacing the tile or re-grouting. With it's easy to use urethane acrylic formula a long lasting stain is attained to rejuvenate and seal sanded and non sanded grout joints. Brilliance Grout Stain provides a "natural" uniform color that is highly resistant to wear, sunlight, water and extreme temperatures. Change or renew the color of grout. Seals and protects grout from stains* and moisture. Extremely durable, with expected wear of up to 15 years. Water based, applies and cleans easily. Use interior or exterior. *Contact Bonded for stain resistance test results.
Use PRO-CRYLIC as an admixture and substitute for a portion of the water content in mortar, plaster or concrete to improve most all the physical properties of these Portland cement mixes. Modified mixes will also resist cracking and chemical degradation due to chloride exposure. PRO-CRYLIC may be used as an admixture in concrete, Portland cement, plaster, stucco, mortar, terrazzo, thinset and tile grout. PRO-CRYLIC can also be used as a bonding adhesive. When used in a slurry/scrub coat mortar, PRO-CRYLIC produces an outstanding bond between new and existing concrete. Mixes prepared with PRO-CRYLIC may be used for patching, restoring and rehabilitating concrete and masonry, such as concrete floors, columns and beams, sidewalks, corridors, lanais, driveways, curbs and steps, loading docks and ramps, precast concrete and pipe. Suitable for both interior and exterior use, PRO-CRYLIC may also be used as an admixture for overlayments and specialty resurfacing mortars.
PRO-FINISH PURE is a cement based, polymer modified, quick setting, concrete finishing material. Use for filling small bug-holes, skim coating and finishing cast-in-place concrete, prestressed and precast concrete, concrete pipe and other concrete surfaces where a smooth, dense surface is required. Material may be used on exterior and interior concrete, on grade, vertical and overhead surfaces. Specially designed for contractor use, PRO-FINISH offers excellent adhesion in this fast-setting, labor saving system. Highly resistant to UV, moisture, salt and acids, PRO-FINISH provides excellent exterior durabilty and impact strength. May be mixed with additive or water to achieve desired results.
PRO-FINISH PURE MODIFIED is a cement based, polymer modified, quick setting, concrete finishing material. Use for filling small bug-holes, skim coating and finishing cast-in-place concrete, prestressed and precast concrete, concrete pipe and other concrete surfaces where a smooth, dense surface is required. Material may be used on exterior and interior concrete, on grade, vertical and overhead surfaces. Specially designed for contractor use, PRO-FINISH PURE MODIFIED offers excellent adhesion in this fast-setting, labor saving system. Highly resistant to UV, moisture, salt and acids, PRO-FINISH PURE MODIFIED provides excellent exterior durabilty and impact strength. No additive required, mix with water only for maximum adhesion.
PRO-FINISH SANDED is a cement based, polymer modified, quick setting, concrete finishing material. Use for filling small bug-holes, skim coating and finishing cast-in-place concrete, prestressed and precast concrete, concrete pipe and other concrete surfaces where a smooth, dense surface is required. Material may be used on exterior and interior concrete, on grade, vertical and overhead surfaces. Specially designed for contractor use, PRO-FINISH SANDED offers excellent adhesion in this fast-setting, labor saving system. Highly resistant to UV, moisture, salt and acids, PRO-FINISH SANDED provides excellent exterior durabilty and impact strength. May be mixed with additive or water to achieve desired results.
PRO-FINISH SANDED MODIFIED is a cement based, polymer modified, quick setting, concrete finishing material. Use for filling small bug-holes, skim coating and finishing cast-in-place concrete, prestressed and precast concrete, concrete pipe and other concrete surfaces where a smooth, dense surface is required. Material may be used on exterior and interior concrete, on grade, vertical and overhead surfaces. Specially designed for contractor use, PRO-FINISH SANDED MODIFIED offers excellent adhesion in this fast-setting, labor saving system. Highly resistant to UV, moisture, salt and acids, PRO-FINISH SANDED MODIFIED provides excellent exterior durabilty and impact strength. No additive required, mix with water only for maximum adhesion.
PRO-NSGROUT can be used for grouting all types of machinery, bearing plates, steel columns, precast concrete as well as additional anchoring conditions that require high in-service strength. PRO-NSGROUT is a non-metallic Portland cement based material, preblended with expansive additives which require only the addition of water and is ideal for handling high load transfers.
Use PRO-PATCH to patch and repair cracked, spalled, chipped and broken concrete or masonry such as floors, sidewalks, corridors, lanais, driveways, curbs,steps, pavers, loading docks and ramps. PRO-PATCH may also be used to resurface horizontal concrete, above or below grade, or as an underlayment or setting bed for tile, patio blocks and other paving materials. PRO-PATCH is suitable for both interior and exterior use.